PERFORMANCE GAIN: 11KW /28NM

The 76 Series Toyota  Landcruiser Wagon is well known for its excellent off road ability, and is ideal for long distance touring and towing. Tried and tested in the toughest of Australian conditions, Torqit’s 76 Series 3” DPF Back Performance Exhaust has the strength and durability to match the performance of this iconic off-roader.  As part of Torqit’s renowned Landcruiser range, it has undergone extensive R & D to maximise the power and torque of your vehicle.

Manufactured from 304 grade brushed stainless steel and up to 2mm thick, the 76 Series DPF back exhaust is one of the most thick and durable mandrel bent systems of its kind in Australia. Not only does the brushed stainless steel look great, its thickness prevents cracking when traversing rough terrain, and adds depth and rumble to the note. The three-bolt laser cut flanges are manufactured from 304 grade steel, and welded inside  and out for extra strength to withstand heavy duty off-roading and touring.

This single exit 76 Series exhaust bolts onto the back of the DPF, and complies with all insurance and warranty requirements. As the owner of a vehicle fitted with a DPF, no doubt you are aware that fewer things damage a diesel engine faster than excessive Exhaust Gas Temperature’s (EGT’s). The Torqit 3” DPF Back Performance Exhaust aims to lower these EGT’s by improving the flow of gases, and increasing your engine’s efficiency and fuel economy.* It is the ideal alternative to deleting your DPF, without the legal ramifications.

Combine this 76 Series system with additional upgrades to completely transform your vehicles’ performance- read up on the top recommendations for the 76 Series Wagon here.

PERFORMANCE EXHAUST FEATURES

Thick Stainless Steel
An exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone. Click here to listen to the sound of cheap vs quality stainless steel.

304 Grade Stainless Steel
The highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems. Find out more on the difference between 304 and 409 grade steel.

Internal & External Welds
High quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter.

Mandrel Bent System
Torqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment. Check out the Torqit Mandrel Bender in action.

SINGLE EXIT PERFORMANCE EXHAUST INSTALLATION

The Torqit 3” DPF back exhaust for the 76 Series is a DIY bolt together system, which comes with a full fitting kit and requires only a basic socket set and spanners for install. It does not require a hoist, and can be fitted on your driveway in approximately two hours.

* Torqit do not claim what percentage of fuel efficiency you could expect by fitting an exhaust as each person will drive their vehicle in a different manner. Please note that any aftermarket accessories, including long-range fuel tanks and suspension upgrades, must be considered before ordering a Torqit exhaust.

Looking for extra guidance when fitting your exhaust? For tips and answers to FAQs, download a copy of our Performance Exhaust Troubleshooting Guide.