3″ DUAL EXIT CAT BACK EXHAUST FOR DS 1500 5.7L RAM: 2009-2018

Perfect for towing and touring, Torqit’s DS 1500 Ram Stainless Performance Exhaust is expertly designed and manufactured to increase power from your exhaust and generate a deep note.

Torqit Performance Exhausts are specifically designed to create a deep note and improve vehicle performance. Our DS RAM exhaust is manufactured using 304 grade stainless steel. The thickness of the steel is 1.7mm on the bends and 2mm on straights. The high quality steel and thickness produces a deep note and guarantees extreme strength even in the toughest terrain.

This exhaust follows the same path of the factory system. It is a 3″ system that can begin from either the headers or the catalytic converter, then trails into a twin exit 5″ exhaust outlets. The design incorporates a muffler. This design reduces the restriction on the flow of the exhaust system whilst still retaining a decent and acceptable sound.

On an exhaust system, once the internal combustion takes place, the engine expels exhaust gasses in the form of high-pressure pulses. These high-pressure pulses create very powerful sound waves. A muffler helps to reduce the sound to a tolerable level. The choice of muffler in this system provides good performance and a nice tone without stealing too much backpressure.

FEATURES

Thick Stainless Steel

All Torqit exhausts have a thickness up to 2mm. This thickness produces a deeper note without cabin drone. Torqit exhaust systems are one of the thickest mandrel bent exhausts in Australia. Due to the thickness, it is extremely difficult to crack, so you can go off road with peace of mind that your system will stay intact.

304 Grade Stainless Steel

304 grade stainless steel is the highest quality material used for exhaust systems. The premium steel will not rust and is much stronger than 409 grade stainless. Our high quality steel produces a deep note and guarantees extreme strength even in the toughest terrain.

Internal & External Welds

All Torqit Performance Exhausts have internal and external welds to increase the strength of the exhaust system. The reinforced system makes it extremely difficult to crack, even in tough off-road applications.

Mandrel Bent System

Mandrel bending supports the exhaust pipe from the inside as it is bent, this prevents crinkling of the pipe. The results are smooth and constant-diameter bends that reduce restriction and improve both the performance and efficiency of your engine.

INSTALLATION

Every Torqit performance exhaust system is designed to bolt together, meaning you can finalise fitment without a hoist. Choose to install the exhaust yourself or arrange for it to be fitted at your local Torqit stockist – whichever works best.

Fitment takes from 60 minutes to three hours depending on the specific exhaust system, whether you have access to a hoist and your expertise with the required tools.

* Please note that any aftermarket accessories, including long-range fuel tanks and suspension upgrades, must be considered before ordering a Torqit exhaust. Please contact our head office to arrange a solution for your vehicle.