3″ DPF BACK EXHAUST FOR FORD BI TURBO 2.0L RAPTOR: 2018…

The Bi Turbo Ford Raptor mixes comfort with function and great off-road ability, perfect for towing and touring. To take this trusty Ute to the next level, Torqit’s Ford Raptor Bi Turbo 2.0L Performance Exhaust has undergone extensive R & D. Tried and tested in harsh terrain, its strength places it among one of the thickest and most durable mandrel bent systems in Australia.

The 304 grade stainless steel is up to 2mm thick, which prevents the exhaust from cracking and produces a deep note without cabin drone. This 3” Raptor exhaust comes complete with a resonator. Combining this with a wider diameter, it produces a much louder note compared to the factory exhaust. The three-bolt laser cut flanges are manufactured from 304 grade steel, and are welded inside and out for extra strength to withstand heavy duty off-roading. Unlike the factory exhaust on this vehicle, Torqit’s 2.0L Ford Raptor Performance Exhaust is visible and worth showing off- it comes in a brushed stainless steel finish with a laser cut badge visible under the bumper.

Bolting onto the back of the DPF, Torqit’s 2.0L Raptor exhaust ensures your vehicle remains legal and compliant with warranty and insurance regulations. As the owner of a vehicle fitted with a DPF, no doubt you are aware there are few things which damage a diesel engine quicker than excessive Exhaust Gas Temperatures (EGT’s). The Torqit DPF back exhaust for the Ford Raptor aims to lower these EGT’s by improving the flow of gases and reducing back pressure, which increases the engine efficiency and fuel economy.* It is the ideal alternative to deleting your DPF, without the legal ramifications.

 

PERFORMANCE EXHAUST FEATURES

Thick Stainless Steel
An exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone. Click here to listen to the sound of cheap vs quality stainless steel.

304 Grade Stainless Steel
The highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems.

Internal & External Welds
High quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter.

Mandrel Bent System
Torqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment. Check out the Torqit Mandrel Bender in action.

 

SINGLE EXIT PERFORMANCE EXHAUST INSTALLATION

Torqit’s 3″ Ford Raptor Performance Exhaust is a full bolt together system, which does not require a hoist for fitment. It can be installed in approximately one hour on your driveway, and only requires a basic socket set and spanners. Detailed fitting instructions are included with the exhaust.

 

* Torqit do not claim what percentage of fuel efficiency you could expect by fitting an exhaust as each person will drive their vehicle in a different manner.

Please note that any aftermarket accessories, including long-range fuel tanks and suspension upgrades, must be considered before ordering a Torqit exhaust.

Please contact us for Warranty information

  • Brushed stainless steel tube up to 2mm thick

  • Premium 304 grade stainless steel

  • Fully mandrel bent system

  • Internal and external welds

  • Three-bolt laser cut flanges

  • Heavy-duty wrap around brackets

  • Stainless steel resonator/muffler

  • Deep note without cabin drone

  • DIY bolt together install

  • Ten year product warranty


SKU HS8176SS
Brand Torqit
Shipping Weight 35.0000kg
Unit Of Measure each

Be The First To Review This Product!

Help other Carparts Online users shop smarter by writing reviews for products you have purchased.

Write a product review